Automated Telemetry Lead Off Signal Flags
Every few minutes, WebRun scans the Norav Medical central station for beds showing a lead-off or signal-loss flag, pings the monitoring tech in Slack to check and reattach the lead, and logs the bed and duration to Google Sheets so chronic offenders stand out.
How do I get notified when a telemetry lead falls off or a signal is lost?
WebRun scans the Norav Medical central station every few minutes for beds showing a lead-off or signal-loss flag. It pings the monitoring tech in Slack with the bed number so they can check the patient and reattach the lead, and logs every event to Google Sheets, so a bed that keeps flagging stands out as a repeat offender instead of getting lost in the noise.
- Lead-off gaps get a tech response in minutes, not left unnoticed
- Every signal-loss event is logged with its duration for review
- Chronic offender beds are flagged automatically for biomed to inspect
Built for telemetry monitor technicians · cardiac care units · charge nurses · hospital biomedical engineering
What does WebRun do on every run?
The exact actions WebRun takes, in order - in plain language, so you can adjust anything.
-
WebRun signs in and gets to work
Opens
www.noravmedical.comin a real browser with your saved login - no setup, no API keys. -
1
Norav Medical - spot lead-off and signal-loss flags
noravmedical.com
WebRun opens Norav Medical to spot lead-off and signal-loss flags. - Open the central station and scan all monitored beds for a lead-off or signal-loss flag
- Note how long the bed has been without a valid signal
- Skip flags that clear on their own within 30 seconds
Done when Every bed still showing lead-off or signal loss is listed with its duration.
-
2
Slack - ping the tech to check the patient
slack.com
WebRun opens Slack to ping the tech to check the patient. - Post the bed number and duration to the monitoring tech's Slack channel
- Ask the tech to check the patient and reattach or replace the lead
- Mark the flag resolved once the signal returns
Done when The tech has been pinged for every bed still without a signal.
-
3
Google Sheets - log repeat offenders
google.com
WebRun opens Google Sheets to log repeat offenders. - Log the bed, date, and duration for every lead-off event
- Tally how many times each bed has flagged this week
- Highlight beds with repeat flags for the biomed team to inspect
Done when This week's lead-off log is updated with any repeat offenders highlighted.
How is each run configured?
Secure by default
Connect once, stays signed in
WebRun signs in once and keeps each session in a persistent environment, so every run picks up right where it left off.
Every action is checked against this policy before it runs.
Questions, answered
Does it try to fix the lead itself?
No. It only flags the bed and pings the monitoring tech in Slack. A person always checks the patient and reattaches or replaces the lead.
How does it avoid false alarms from brief drops?
It ignores flags that clear on their own within 30 seconds, so a momentary bump or a patient rolling over does not trigger a ping.
How do we spot a bed with a recurring problem?
Every lead-off event is logged to Google Sheets with the bed and duration, and beds that flag repeatedly in a week are highlighted for biomed to inspect.
Related templates
Put this on autopilot.
Turn it on in minutes - or have our team set it up for you.